Main features:
Main features:
- Operating voltage: 18 to 30 Vdc
- Standby current under 24 V: 220 uA
- Current under alarm at 24 V: 5 mA
- Average coverage: 50 m2
- Operating temperature: -10 to 50°
MFR ref.: NUG30253
Main features:
- LED strobe light technology for long life and low power consumption
- Coverage volume up to 7.5 m (switchable up to 2.5 m)
- 0.5 or 1 Hz flash rate (switches to 0.5 Hz to reduce power consumption)
- Easy installation
- IP33C (shallow base) and IP65 (deep base) protection
- White or red body
- White or red flashing strobe light options
- Certified to EN54-23, NF, VdS, CNBoP and AS standards
MFR ref.: NUG30493
Main features:
- Integrated Alarm Management Unit (UGA)
- 2, 4 or 8 lines of 32 manual call points or automatic detectors
- Integrated power supplies and batteries
Ref. : NUG31020
Main features:
- Integrated Alarm Management Unit (UGA)
- 8 lines of 32 manual triggers or automatic detectors
- 2 Lack of Voltage safety zones
- Provide external power supply for the servos
Ref. Manufacturer: NUG31071
Main features:
- Integrated Alarm Management Unit (UGA)
- 8 lines of 32 manual triggers or automatic detectors
- 4 undervoltage or voltage emission safety zones
- Signaling unit (4 series of 3 lights)
- Provide external AES power supply for servos and sirens
Ref. Manufacturer: NUG31067
Main characteristics :
- Operating voltage: 18 to 30 Vdc
- Standby current at 24V: 220 μA
- Current in alarm under 24V: 5 mA
- Logo color: black
- Operating temperature: 0 to 50°C
- Admissible humidity without condensate. : 0% to 95%
- cover avg. : 50 m² – Certification number: L 048 A0
- Reference standards: EN 54-7
Main characteristics:
- Thin profile, to fit into all types of ceilings.
- Equipped with a two-color indicator (yellow/red) visible at 360° to easily identify a point in Alarm or in Fault.
- Passage of cables on the side of the detector or from the back.
- Anti-theft clip supplied with each base.
- Split wiring terminals to simplify the wiring of the detection lines
- Detector delivered with its protective cover to avoid any clogging during the work
- Automatic addressing
- Open line or loopback wiring
- Short circuit switch integrated in each detector
Main features:
- Operating voltage: 15 to 30 Vcc
- Running under 24 V: 70 UA
- Running under alarm 24 V: 25 mA
- Average cover: 50 m2
- Operating temperature: 0 to 50 °
Ref. manufacturer: NUG30246
Combined detector or multi-sensor opto-thermal which integrates 2 technologies and allows the detection of two effects characterizing the start of a fire.
Designed for small surface installations, the VESDA Laser Focus is the smallest in its range. The model mentioned below provides surface monitoring up to 250m2. Provide an external SEA.
Main features:
- Size: 104 x 42mm
- Weight: 125g
- White colour
- IP20
- Operating temperature: -10°C to 55°C
- red LED
- Material: ABS AE
- Conventional infrared
- Viewing angle: 45°
- Certification: CE DPC NF
EN54-23 light diffuser for delivering an evacuation signal intended for noisy premises.
- Maximum volume 90 dB (A) / 1 m
- Degree of protection IP65
- Class B for broadcasting a fire escape sound conforming to standard NFS 32-001
- Its raised bottom leaves more room for wiring
- It comes with two rubber grommets
- Usable in type 1, 2a and 4 Alarm equipment
- NF SSI certified
- Reference standards: EN 54-3 and NFS 32-001
MFR ref.: NUG30450