SA, SAG

€0.00

Tax excluded

Aluminium alloy junction boxes for zone 1, 2, 21, 22

Zone 1,2,21,22
Degree of IP66 protection
Aluminium alloy body and lid
Silicone seal
Stainless steel bolts and screws
RAL 7035 polyester coating
IK10 shock protection

Garanties sécurité

(à modifier dans le module "Réassurance")

Politique retours

(à modifier dans le module "Réassurance")

Politique de livraison

(à modifier dans le module "Réassurance")

The junction boxes of the SA, SAG series are mainly used as explosion proof boxes and/or to transport cables to the control rooms for analog or digital signals as well as for the control, monitoring and signaling associated with equipment such as engines, pumps … etc., or to provide physical readings such as flow, level, temperature, pressure, etc.

Construction
Low-copper aluminum alloy. Stainless steel bolts and screws. Silicone seal. Internal/external earth screws. Fixing legs. Polyester coating RAL 7035 (Ex e) or RAL 5015 (Ex i).

Certification	ATEX Iecex
Suitable for	Area 1/21
Protection mode	Ex Ex e Ex tb
Degree of protection	IP66
Choc resistance	IK10
Corrosion resistance	Aluminium alloy tested by standards EN 60068-2-30 (hot/wet cycles) and EN 60068-2-11 (salt fog tests)
Material	Aluminium
Frequency	50/60 Hz
Rated current	312 A, 1 A for exec. Ex eb, 100 mA for exec. Ex ia, 10 A for exec. Ex eb, 100 mA for exec. Ex ia
Terminal section	1.5 ÷ 300 mm2
Gaskets	Silicone acid/hydrocarbon and high temperatures resistant
Bolts and screws	Stainless steel Entries: 2 ISO M25 entries
Mounting type	Aluminium cast iron feet for M6 screws