Previous
Next
Flame detector UV/IR-210/1CZ
€0.00
Tax excluded
OGGIONI flame detectors use a microprocessor for the analysis of sophisticated electronic signals.
The UV/IR and IR3 flame detector uses the analysis of the flame flicker frequency as an additional alarm criterion. UV/IR and
IR3 flame detectors have good false alarm rejection. UV is immune to virtually all false alarm sources except arc welding. .
Garanties sécurité
(à modifier dans le module "Réassurance")
Politique retours
(à modifier dans le module "Réassurance")
Politique de livraison
(à modifier dans le module "Réassurance")
12-24 VDC (10-28 VDC) power supply
Normal Current 25 mA at 24 VDC
Alarm in progress, at 24 Vdc +/- 75 mA per 24 Vdc
Startup time <10 s
Alarm output setting LED and selectable relays latch/no latch, factory setting: latch
Standard current output available 0-20 mA (stepped, sinking, non-isolated)
Alarm response time <10 sec.
Cone of vision of at least 90°
Glass-reinforced polyester (GRP) housing, cover screw tightening torque 2 nm minimum
IP65 ingress protection
Operating temperature Da -40 °C to +70 °C (da -40 °F to +158 °F)
Ambient temperature ATEX and FM 3611: -25 °C to +70 °C (-13 °F to +158 °F)
Automatic and manual automatic sensor test (integrated automatic test) and manual self-test
Dimensions 125 x 80 x 57 mm (4.9 x 3.15 x 2.25 in)
Weight: 465 gr (1.05 lb)
M20 cable gland (cable conduit diameter 5.5-13 mm, two stages 5.5-8 mm and 8-13 mm)
| Certification | ATEX EN54-10 |
|---|---|
| Operating temperature range | -40 to +70°C |
