Flame & Heat detector Gas and flame

Flame detector with UV, UV/IR or IR3 technology, GPR housing, suitable for ATEX zone 2/22, EN54-10, FM3260 and FM3611 certified.

SENSE-WARE flame detectors use a microprocessor for sophisticated electronic signal analysis. Sensors must exceed their alarm thresholds to trigger a fire alarm. The UV/IR and IR3 flame detector uses the analysis of the flicker frequency of the flame as an additional alarm criterion. UV/IR and IR3 flame detectors adequately reject false alarms. The UV reacts to virtually no false alarm sources, with the exception of arc welding. The table below shows the most common installations in which the three models of 210 series flame detectors can be used.

The IRY2 detector is a conventional class II infrared flame detector certified NF.

The X3301 detector is a conventional multi-frequency infrared ATEX flame detector for hydrocarbon fires.

Its technology provides continuous protection, particularly for applications requiring a maximum level of false alarm rejection and extremely high performance in fire detection.

This waterproof automatic detector can be installed outdoors or indoors. It is ideal for detection in recycling centers, warehouses or in the oil, gas, chemical and pharmaceutical industries.

This equipment has several types of outputs and is suitable for use in SIL2 level applications. It is compatible with many fire, detection or API control panels. The detector is completely configurable using the wireless communication terminal (TLU) or via HART(R) communication, providing great flexibility to the user. The TLU allows you to adjust the response time, sensitivity and configuration of the outputs, and can be used in hazardous areas to carry out tests on optical, electronic parts and outputs.

All MultiFlame DF-TV7 detectors have built-in continuous optical self-tests to ensure safe operation. The TLU600 makes detector setup and testing easy, and can be operated remotely to avoid the need for a test light. It also makes it possible to control the optical parts of the detector and the outputs (current, relay) in a classified area.

The 40 Series flame detectors are equipped with state-of-the-art technology for optimized detection and better resistance to false alarms while optimizing costs.

The sensor uses enhanced infrared monitoring technology that analyzes IR emissions levels in a narrow band of 4.2-4.7um

The 5710 High Temperature Transit Flame Sensor monitors high temperature materials (up to 240° with highest sensitivity), transported on conveyor systems at speeds between 0.5 and 6 m/s, and is triggered when the material reaches the ember or flame

5730 High Temperature Transit Flame Sensor Monitors

high temperature materials (up to 240° for maximum sensitivity),</p >

Transport on conveyors at speeds between

0.5 and 6m/s, and triggers when the material reaches the ember </p >

or flame state.

55000-021APO

The XP95 Exd Flame Detector (IR3) is designed to protect areas where open flaming fires may be expected. It is sensitive to low frequency, flickering infra-red radiation emitted by flames during combustion.

OGGIONI flame detectors use a microprocessor for the analysis of sophisticated electronic signals.

The UV/IR and IR3 flame detector uses the analysis of the flame flicker frequency as an additional alarm criterion. UV/IR and

IR3 flame detectors have good false alarm rejection. UV is immune to virtually all false alarm sources except arc welding. .

The OGGIONI TC-169/1 non-EX flame detector test lamp activates OGGIONI 210 series flame detectors;

UV/IR-210/1, UV-185/5 and IR3-109/1. For all models, the detection range is 4 meters (13 ft). The TC 169/1 test lamp is not EX and may only be used in safe areas.

RFD-2000X is a UV/IR type flame detector with international certifications.

Identify fire when UV and IR sensors simultaneously detect the presence of a flame.

Maximum detection range of 30 meters with a 90 degree cone of vision.

Allows operation in hazardous areas.

User selectable output options include relays, 4-20 output and RS-485.

RFD-3000X is a Triple IR (IR3) flame detector with international certifications.

Allows fire to be identified by analyzing the IR wavelengths of a long-distance flame.

Maximum detection range of 60 meters with a 90 degree cone of vision.

Allows operation in hazardous areas.

User selectable output options include relays, 4-20 output and RS-485.