Controller Fire safety

Main features:

• Integrated Alarm Management Unit (UGA)
• 2, 4 or 8 lines of 32 manual call points or automatic detectors
• Integrated power supplies and batteries

Ref. : NUG31020

Main features:

• Integrated Alarm Management Unit (UGA)
• 8 lines of 32 manual triggers or automatic detectors
• 2 Lack of Voltage safety zones
• Provide external power supply for the servos

Ref. Manufacturer: NUG31071

Main features:

• Integrated Alarm Management Unit (UGA)
• 8 lines of 32 manual triggers or automatic detectors
• 4 undervoltage or voltage emission safety zones
• Signaling unit (4 series of 3 lights)
• Provide external AES power supply for servos and sirens

Ref. Manufacturer: NUG31067

Designed for installations in buildings requiring a category A fire detection system, addressable.

Incendie Sensa.CM Security Launch Centralizer available in various configurations for 16 to 176 orders available.

Designed to simplify the installation of fire safety control units and reduce space requirements, it brings together the DHW and CMSI, power supplies and batteries.

It is ideal for medium to large installations requiring a fire detection system and addressable CSMI. It can manage up to 1024 points, one or more alarm zones and up to 144 security commands.

26 or 48 or 56V – 50 W – 7 Ah

The new range of SPSM safety power supplies is an integral part of the Fire Safety System. It meets the requirements of the French market. CE certified, the entire range complies with standards EN 54-4, EN 12101-10 and 61-940.

COM-SD-PSTN and COM-SD-GSM make it possible to transmit personalized voice messages to four recipients: A site identification message + 4 distinct alarm messages. Remote monitoring functions in PSTN or GSM ensure transmission in protocols: Contact ID, SIA1, SIA2, SIA3 & Scantronic. COM-SD-GSM allows SMS to be sent to 4 recipients.

COM-DATA-4G is a plug-in module that allows a control panel to access the Eaton SecureConnect™ service over the Internet using 4G and 2G mobile phone networks

COM-MAX-12 is a universal transmitter that works on GSM 2G/3G and Ethernet networks.

Always connected - Use COM-MAX to maintain a permanent connection with your sites via Ethernet and/or GSM. Configure the transmitter as a backup to an Ethernet connection, without worrying about power outages or poor internet connections.

Independent connectivity - No need to connect to a box, the COM-MAX can provide full connectivity without requiring an Ethernet connection. This is ideal for temporary installations or premises without an Internet connection.

Adaptive technology - COM-MAX will always search for the best possible mobile signal, automatically switching between 3G and 2G technologies.

Secure connectivity - COM-MAX is designed to provide the highest security, using unrivaled protection against digital threats

Autonomous Telephone Transmitters with 8 inputs 10 correspondents by Voice or SMS alert messages. SD3: GSM & PSTN / SD-GSM: GSMSD3 & SD-GSM:

Alert messages - The 8 inputs are associated with 8 voice messages to be recorded on the transmitter. 10 correspondents can be called and receive a voice message or an SMS.

This is the most complete model that allows voice messages to be sent via GSM network or analog PSTN telephone line.

They are compatible with all operators and require a SIM card without a pin code. They use 2G networks.

The 700R range transmitters and receivers enable numerous security and wireless control applications. A complete range of peripherals for the protection of property and people.

It is the ideal complement to any wired system for transmitting information or alarms by radio. It may happen that the installation of cables is impossible (road to cross, walls to drill, inaccessible passage, etc.), in this case the continuity of information can be done by radio. Radio ranges are evaluated and can be several hundred meters. Each transmitter has a unique code which must be registered on its receiver

Specially designed for applications in boiler rooms and car parks, the MX 15 central unit offers good value for money for continuous monitoring of risks linked to toxic or flammable gases and fumes in the ambient air.

Easy to install and use, the MX 15 control unit combined with OLC(T) 10 detectors represents an affordable solution for light industrial applications.